Calrad Electronics 40-998-HS Manual Do Utilizador
C A L R A D
100
40 series -
security switches
40-652 hoLD-Up UNit
Double button operation virtually
eliminates accidental triggering.
Sturdy metal case, silver plated
SPST contacts. Prewired for quick
installation. Color beige, contacts
rated for 1 Amp @25Vdc. Size is
1.99”(W) x .99”(H) x 1.74”(D).
40-650 emeRgeNCY pANiC
sWitCh
sWitCh
3" long,
7
/
8
"
wide
, 2
5
/
8
"
mounting
centers. Normally open circuit. Screw
terminals on the rear of switch for
connection.
terminals on the rear of switch for
connection.
40-650A
Same as 40-650 only with normally
open and closed options available.
open and closed options available.
40-654 tAmpeR sWitCh
SPST momentary contact. Use in
conjunction with most security
devices. Normally closed (with
plunger depressed). Contact rating
.5 Amp-50 Vdc. Size is 1.84” long x
1.09” wide.
40-758 sURFACe moUNt
toggLe sWitCh
toggLe sWitCh
SPST toggle switch mounted in a
white impact housing. Mounting
centers 2.125”. Overall height 2”, 6”
black flying leads, stripped. Chrome
switch position ID label ON/OFF.
Current rating 3Amps @125Vac,
50Vdc.
40-672 ALUmiNUm Z-BRACket
Needed for extending magnet
greater distances when uneven
surfaces exist. Used for 40-750,
751, 752. Over-all length is 8”.
Long tongue is 5.75” and short
tongue is 2.5”.
40-673 pLAstiC NYLoN hoLDeR
Used for recessed mounting of
contacts and magnets on steel doors.
Holds magnet or contact in place
away from frame. For use with our 40-
659 contact, magnet. Hole size 3/4".
Color: grey.
40-768 3/8” stUBBY
ReCesseD CoNtACt With
sCReW teRmiNALs
ReCesseD CoNtACt With
sCReW teRmiNALs
5/8” long switch for tight
installations with short mounting
areas. Switch/magnet case with
ribs for securing in holes, 5/16”
operating gap. Closed circuit
with magnet in place. Available
in white only. 100mA 100Vdc
max., 1A 10Vdc. Contact length
is .78”.
40-769 3/8” ReCesseD
CoNtACt With sCReW
teRmiNALs
CoNtACt With sCReW
teRmiNALs
Switch/magnet case with ribs for
securing in holes, 5/8” operating
gap. Closed circuit with magnet
in place. Available in white only.
100mA 100Vdc max., 1Amp
10Vdc. Contact length is 1.32”.
40-663A spst DoUBLe siDeD
keY sWitChes
keY sWitChes
Sometimes called a shunt lock.
Complete with 2 keys and mounting
hardware. Hook up using screw
terminals. Used with most alarm
equipment and with all Calrad
Alarm Modules.125Vac, 4Amp.
250Vac, 2A. Mounts in 1.8” deep
hole. Bushing length to connectors
1.8”, Mounts in .75” hole.
RoUND high seCURitY
keYLoCk sWitChes
keYLoCk sWitChes
Mounts in 3/4" hole. 111/16" deep.
3 Amp - 125V.
40-682
.............SPST Momentary,
Spring Return
40-683
.......... SPST Shunt On/Off
Solder Terminals
pLAstiC BALL pLUNgeR
sWitCh
sWitCh
Completely environmental proof for
window, door protection, etc. Mounts in
3
/
4
"
hole. Mounting centers
1
3
/
16
".
Rating
100mA-100 Vdc max., 1 Amp-10 Vdc
max., 10 watts max. 30” wired leads.
Overall mounting depth 1.7”.
40-670
............ Normally Closed
40-671
....... Normally Open and
Normally Closed contacts
(Both with ball depressed.)
Metal Ball
40-676 LoW pRoFiLe pLAstiC
BALL pLUNgeR sWitCh
BALL pLUNgeR sWitCh
Completely environmental proof for
window, door protection, etc. Mounts
in 3/4" hole. Mounting centers 1
5/16". Rating 100mA-100 Vdc max.,
1 Amp-10 Vdc max., 10 watts max.
Normally closed switch with 18”
leads. Overall mounting depth 1”.
Includes .1” plastic spacer.
Plastic Ball
Visit Calrad on the Web at: www.calrad.com
Small Slotted
Screw Driver
Required