Toshiba IK-SX1L Manual Do Utilizador

No image

• Is power properly supplied?
• Is the lens iris adjusted properly?
• Is the CRT monitor adjusted properly?
• Is the shutter mode set correctly?

* Design and specifications are subject to change without notice.

Power supply

Power consumption

Image sensor
(Effective pixels)

Scanning system

Scan frequency

Sensitivity

Lens mount

Ambient temperature

Ambient humidity

Weight

External dimension

Gain

Video output

Electric shutter

Mode

Partial scanning

Sync signal output

External trigger input

Optional parts

DC12 

±

 10%

Approx. 1.7W

2/3inch  Progressive Scanning CCD
(Horizontal: 1392 pixels, Vertical: 1040 pixels)

Noninterlace

Horizontal: 15.998 kHz, Vertical: 14.98 Hz

F16  600 lx (GAIN OFF)

C mount

32 to 104

°

 F (0 to 40

°

C)

Less than 90%

Approx. 4.77 oz (135g)

1.73" (W) x 1.73" (H) x 2.05" (D)
(44 (W) x 44 (H) x 52 (D) mm)     (except for protruded portion)

ON (-3 to 12 dB), OFF (0 dB)

IK-SX1L: EIA RS-644 LVDS video 8-bit digital output
IK-SX1:

Camera link video 8-bit digital output

1/15s, 1/100s, 1/500s, 1/1000s, 1/2000s, 1/4000s,
1/10000s, 1/50000s

Internal synchronization, internal synchronization draft,
internal synchronization partial scanning
1-Pulse trigger, 1-pulse trigger partial scanning
Pulse width trigger, Pulse width trigger partial scanning

Scanning area 1/15 (70 lines, 6 fps)
Scanning area 1/2.6 (400 lines, 30 fps)
Scanning area 1/2 (560 lines, 24 fps)
Scanning area 2/3 (700 lines, 20 fps)

HD, VD/LEN, FEN

LVDS format (IK-SX1L)
Camera Link format (IK-SX1)

PCK (28.63636 MHz) LVDS format  (IK-SX1L)

Camera Link format (IK-SX1)

TRIGGER; Low level: Less than 0.4V, High level: 3.4 to 5V

Negative
More than 20

µ

s pulse width

EXC-SX03M (cable for IK-SX1L), EXC-SX03A (cable for IK-
SX1L), EXC-CL05 (cable for IK-SX1), etc.