Toshiba SD-V290-S-TU Manual Do Utilizador

Some channels are
skipped over when
using CH/TRK (+/-)

Picture and sound of
broadcasting channel
are weak or missing.

Camcorder image is not
shown.

Camcorder image via
A/V input to DVD+VCR
is not shown on TV
screen.

Timer recording is not
possible.

TIMER indicator
appears after DVD+VCR
is turned off.

Stereo Audio Record
and/or Playback is not
present.

z

Those channels were deleted with the
CH. ADD/DEL option.

z

Antenna or cables are loose.

z

Wrong TUNING BAND option is being
used.

z

Camcorder is off.

z

DVD+VCR SOURCE SELECT is not set
to LINE1 or LINE2.

z

Clock in DVD+VCR is not set to correct
time.

z

Timer has been programmed 
incorrectly.

z

TIMER indicator does not appear after
programming timer.

z

DVD+VCR is in Timer Recording mode.

z

TV is not Stereo-compatible.

z

Broadcast program is not in stereo for-
mat.

z

DVD+VCR A/V Out jacks are not con-
nected to TV A/V In jacks.

z

DVD+VCR Audio/Video Out is not
selected for viewing at the TV.

z

DVD+VCR BROADCAST TYPE mode is
set to SAP or MONO.

z

Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 16. 

z

Tighten connections or replace cable.

z

Try all TUNING BAND options. See
“Channel Selection” on page 16 for
details.

z

Turn camcorder on and operate 
properly.

z

Press INPUT SELECT to select LINE
input channel (LINE1 or LINE2).

z

Set clock to correct time. See “Setting
the Clock” on page 17.

z

Reprogram Timer. See “Timer
Recording” on page 24.

z

Reprogram Timer 

z

This is the normal indication that the
DVD+VCR is in TIMER mode.

z

No action is possible.

z

No action is possible.

z

Make A/V connections. Stereo is 
available only via A/V output from
DVD+VCR.

z

Select AUX or A/V source as TV input.

z

Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR Setup
Menu” on page 16.

Moisture condensation can occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

• Under extremely humid conditions.

In locations where moisture condensation may occur:

• Keep the DVD+VCR plugged into an AC power outlet

with POWER On. This will help prevent condensation.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.