Toshiba IK-TF5C Manual Do Utilizador
24
7. 5 EXT TRIG (External trigger)
Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are
output. There are five modes: 1P SNR, 1P SR, PW SNR, PW SR, RR.
output. There are five modes: 1P SNR, 1P SR, PW SNR, PW SR, RR.
( 1 ) 1P SNR (1 Pulse Trigger Sync Non Reset)
Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are
output.
output.
(1. 1) 1 Pulse Trigger SYNC-NON RESET Picture Output Timing
(At Time of One-shot or Continuous External VD/Continuous External HD Input)
*1: Externally input signal
*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
ger, there will be an effect on the video.
About 1
µs
External VD IN*
1
External HD IN*
1
(Internal VD)
Trigger*
1
About 1H
Negative polarity mode
Positive polarity mode
Exposure period*
2
Exposure period*
2
RGB data
(video interval image)
FVAL
LVAL,
DVAL
DVAL
20H (Partial scanning OFF)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
The internal VD falling edge is within the
exposure period and thus video is not output. *
exposure period and thus video is not output. *
3
IK-TF5C(E)
05.3.14, 14:58
Page 24
Adobe PageMaker 6.5J/PPC