TP-LINK TL-WR 841 ND Manual Do Utilizador

 

TL-WR841N/TL-WR841ND

 

-51- 

pure NAT router. Port Triggering is used for some of these applications that can work with an NAT 

router.  

 

Figure 4-33   

Port Triggering 

Once the router is configured, the operation is as follows: 

1.  A local host makes an outgoing connection using a destination port number defined in the 

Trigger Port field.   

2.  The router records this connection, opens the incoming port or ports associated with this 

entry in the Port Triggering table, and associates them with the local host.   

3.  When necessary the external host will be able to connect to the local host using one of the 

ports defined in the Incoming Ports field. 

¾

 

Trigger Port - The port for outgoing traffic. An outgoing connection using this port will 

"Trigger" this rule. 

¾

 

Trigger Protocol - The protocol used for Trigger Ports, either TCP,  UDP, or All  (all 

protocols supported by the router). 

¾

 

Incoming Ports Range - The port or port range used by the remote system when it 

responds to the outgoing request. A response using one of these ports will be forwarded to 

the PC that triggered this rule. You can input at most 5 groups of ports (or port section). 

Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 

3010-3030. 

¾

 

Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or 

ALL (all protocols supported by the router). 

¾

 

Status - The status of this entry either Enabled or Disabled. 

1. Click 

the Add New… button, the next screen will pop-up as shown in Figure 4-34. 

2.  Select a common application from the Common Applications drop-down list, then the 

Trigger Port field and the Incoming Ports field will be automatically filled. If the Common