TP-LINK TL-WR 941 ND Manual Do Utilizador

TL-WR941ND

 

This chapter will show you how to configure the basic functions of your TL-WR941ND Wireless N 

Router using Quick Setup Wizard within minutes. 

The default domain name of the TL-WR941ND Wireless N Router is 

http://tplinklogin.net

, the 

default IP address is 192.168.0.1, and the default Subnet Mask is 255.255.255.0. These values 

can be changed as you desire. In this guide, we use all the default values for description. 

Connect the local PC to the LAN ports of the Router. And then you can configure the IP address 

for your PC in the following two ways. 

¾

 

Configure the IP address manually 

1)  Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this, 

please refer to 

Appendix B: "Configuring the PC."

 

2)  Configure the network parameters. The IP address is 192.168.0.xxx ("xxx" is any number 

from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (The 

Router's default IP address) 

¾

 

Obtain an IP address automatically 

1)  Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. 

If you need instructions as to how to do this, please refer to 

Appendix B: "Configuring the 

PC."

 

2)  Then the built-in DHCP server will assign IP address for the PC. 

Now, you can run the Ping command in the command prompt to verify the network connection 

between your PC and the Router. The following example is in Windows 2000 OS. 

Open a command prompt, and type ping 192.168.0.1, and then press Enter. 

¾

  If the result displayed is similar to the 

Figure 3-1

, it means the connection between your PC 

and the Router has been established well.   

-8-