TP-LINK TL-WR 941 ND Manual Do Utilizador

TL-WR941ND

 

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one 
of these protocols, then you must configure your connection manually. 

Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the screen 

as below. 

 

Figure 4-12  LAN 

¾

 

MAC Address - The physical address of the Router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation 

(factory default: 192.168.0.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

 

1.  If you change the IP Address of LAN, you must use the new IP Address to login the Router.   

2.  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP 

server will change accordingly at the same time，while the Virtual Server and DMZ Host will 

not take effect until they are re-configured. 

Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the 

screen below, 

Figure 4-13

: 

 

Figure 4-13  MAC Address Clone

 

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely 

needed here. 

-35-