TP-LINK TL-WR 941 ND Manual Do Utilizador

 

 

- 44 - 

 

Figure 4-31 Firewall 

¾

 

Enable Firewall - the general firewall switch is on or off. 

¾

 

Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two 

default filtering rules of IP Address Filtering, either Allow or Deny passing through the router. 

¾

 

Enable Domain Filtering - set Domain Filtering is enabled or disabled. 

¾

 

Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the 

default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router. 

Choose menu “Security→IP Filtering”, you can configure the IP Address filtering rule in the 

screen (shown in Figure 4-32). The IP Address Filtering feature allows you to control the Internet 

Access of some specific users based on their IP addresses.