Transcend Information 35 Ultra Manual Do Utilizador

 

23

Troubleshooting︱ 

If a problem occurs with your StoreJet 35 Ultra, please first check the information listed below before taking 
your StoreJet 35 Ultra in for repair. If you are unable to remedy a problem from the following hints, please 
consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support 
services on our website at www.transcendusa.com   

  The Software CD does not auto-run in Windows

®

Go to the Device Manager in the Control Panel and enable the Auto-Insert function of the CD-ROM drive. 
Alternatively, you can manually run the “StoreJet.EXE” file on the Software CD. 

  My computer cannot detect the StoreJet 35 Ultra

Please try the following: 

1.  Make sure the power switch in the ON ( – ) position and the cooling fan is spinning. 

2.  Check if the Power Adapter is securely connected to the StoreJet 35 Ultra’s “DC PWR” input, and that its 

power cable is securely connected to the both the Power Adapter and your home’s power outlet. 

3.  Verify that you are using the USB or eSATA cable that came in the StoreJet 35 Ultra package. 

4.  Make sure your StoreJet 35 Ultra is securely connected to the USB or eSATA port. If it is, try unplugging 

it and plugging it back in again. You can also try using a different USB or eSATA port.   

5.  Turn the StoreJet 35 Ultra’s power switch off, wait for 10 seconds, and then turn it back on again. 

6.  Ensure the USB port or eSATA port on your computer is enabled and functioning properly. If disabled, 

please refer to the user’s manual of your computer, motherboard, or eSATA interface card. 

If you still cannot detect the StoreJet, please see below for help with specific operating systems. 

  The StoreJet 35 Ultra does not Power ON

The StoreJet 35 Ultra must be powered from the mains using the power adapter and the power switch turned 
on. If you cannot power on the StoreJet35 Ultra and you have ensured that all the cables are connected 
properly and the power switch is on, try plugging the power cable into another power outlet. 

 

If you previously used your drive in Windows

 2000, XP, or Vista™, it is most likely formatted with NTFS, 

which is not compatible with Mac

 OS. To store and backup data on your Mac

 please follow the 

instructions on formatting the StoreJet 35 Ultra on a Mac

  to convert the drive to Mac’s HFS+ format. If you 

plan to regularly use the drive with both Windows and Mac computers, we recommend formatting the drive 
to the FAT32 file system. Keep in mind that formatting the drive will erase all existing data on the drive. 

 

If you previously used your drive in a Windows

 2000, XP, Vista™, or Mac

 computer, it is most likely 

formatted with NTFS, which is not compatible with Linux

. Please follow the instructions on formatting the 

StoreJet 35 Ultra in Linux. Remember that formatting the drive will erase all existing data on the drive. 

  I connected the StoreJet 35 Ultra to my computer with both eSATA and USB 

 

If you connect both eSATA and USB at the same time, the StoreJet 35 Ultra will only be recognized on your 
computer as an eSATA device. 

 

Your motherboard chipset must support 

Advanced Host Controller Interface (AHCI)

 in order to use eSATA.