Transcend Information TS8GMP840 Manual Do Utilizador

The MP840 has advanced recording features and is capable of recording audio from 2 different sources: 
FM Radio

 or Built-In Microphone. Both are capable of making very high quality Audio Recordings. 

The FM Radio recording feature has been covered in the previous section “

.” 

Pressing and Holding the “A-B Repeat / Rec” button 

 for more than 2 seconds in any mode 

except the RADIO Mode will begin an audio recording using the MP840’s Built-in Microphone. 

A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in 

the [/MICIN.DIR/] folder. 

 

Files Recorded using the Built-in Microphone are named in the order [Month/DayM001.WAV], then 

 and so forth. 

Pressing the “PLAY / PAUSE / POWER ON-OFF” button 

  during a recording will Pause the 

recording, pressing the “PLAY / PAUSE / POWER ON-OFF” button 

  again will resume the 

recording. 

Press the “A-B Repeat / Rec” button 

 for more than 2 seconds during a recording to stop the 

recording and the screen will return to the RECORD Mode. 

Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator. 

Low (8KHz) 

1 (mono) 

128 hrs 

256 hrs 

Med (16KHz) 

1 (mono) 

64 hrs 

128 hrs 

High (32KHz) 

1 (mono) 

32 hrs 

64 hrs 

 

If not enough memory space is available, or the battery power is too low, the MP840 cannot support 
the maximum recording capacity as outlined in the above table. 

 

The closer you move the MP840’s Microphone to the source of the sound the higher the quality of the