Troy-Bilt 420 Manual Do Utilizador

Página de 16
8
4
Operating 
Your Lawn 
Mower
Blade Control
The blade control is attached to the upper handle of 
the mower. Depress and squeeze it against the upper 
handle to operate the unit. Release it to stop engine and 
blade. 
WARNING: This blade control is a safety 
device. Never attempt to bypass its opera-
tions.
Cutting Height Adjustment Levers
One adjustment lever is located at each wheel and is 
used to adjust the cutting height. All four wheels must 
be positioned at the same height to ensure a uniform 
cut.
Recoil Starter
The recoil starter is attached to the right upper handle. 
Stand behind the unit and pull the recoil starter rope to 
start the unit.
Gas and Oil Fill-Up 
Refer to the engine manual for instructions.
1.  Check oil level and add oil if necessary. Follow engine 
manual for this.
2.  Service the engine with gasoline as instructed in the 
engine manual. Refer to the engine manual for the 
location of the gas and oil fill.
WARNING: Use extreme care when handling 
gasoline. Gasoline is extremely flammable 
and the vapors are explosive. Never fuel the 
machine indoors or while the engine is hot or run-
ning. Extinguish cigarettes, cigars, pipes and other 
sources of ignition.
WARNING
The blade control is a 
safety device. DO NOT 
bypass its operations.
Use extreme care when 
handling gasoline. 
Gasoline is extremely 
flammable and the vapors 
are explosive. Never fuel 
the machine indoors or 
while the engine is hot 
or running. Extinguish 
cigarettes, cigars, pipes 
and other sources of 
ignition.
Keep hands and feet 
away from the chute area 
on cutting deck. Refer to  
warning label on the unit.
Know Your Lawn Mower
Figure 4-1: The main components on the mower. 
Now that you have setup your lawn mower, its important to become acquainted with its controls and features.
Cutting Height Adjustment 
Levers (one at each wheel)
Blade Control
Recoil Starter