BMW Part-No. 01 41 0 157 628 Manual Do Utilizador
138
Components of the M Mobility
system
system
1 On/Off switch
2 Connection hose with manometer for
connecting the compressor with the
sealant container or to connect the
compressor to the wheel
sealant container or to connect the
compressor to the wheel
3 Manometer for indicating the tire
pressure
4 Connector hose from the sealant
container to the wheel
5 Sticker showing maximum speed
6 Plug and cable for the cigarette
lighter socket
7 Protective gloves, not shown
Filling with sealant
1. Take off the round cover and take out
hose 4. Unscrew the valve dust cap
from the defective wheel and screw
the hose to the valve. Keep the dust
cap in a safe place
from the defective wheel and screw
the hose to the valve. Keep the dust
cap in a safe place
2. Flip open the cover and pull out the
enclosed protective gloves. Take out
hose 2 with the manometer and
screw it to the terminal for the seal-
ant container as shown in the illustra-
tion
hose 2 with the manometer and
screw it to the terminal for the seal-
ant container as shown in the illustra-
tion
3. Make sure that the system has been
switched off, position 0.
Take out plug 6 and insert it into the
cigarette lighter socket in the pas-
senger compartment – refer to
page
Take out plug 6 and insert it into the
cigarette lighter socket in the pas-
senger compartment – refer to
page
Repairing a flat tire
Online Edition for Part-No. 01 41 0 157 628 - © 09/03 BMW AG