BMW Part-No. 01 41 0 157 628 Manual Do Utilizador

 

19

 

The brake warning lamp lights 
up together with the yellow indi-
cator lamps for ABS

 

●

 

 and 

DSC:
The entire ABS, CBC and DSC 
control system has failed. Con-
tinue to drive; drive cautiously 
and defensively and avoid full 

brake applications. Please have the 
system checked by your BMW center 
as soon as possible.
For additional information: refer to 
pages 

ABS, CBC and DSC indicator 
and warning lamps for Canadian 
models.

 

Sequential M gearbox with 
Drivelogic
If the indicator lamp fails to go 

out after the engine has been started, 
or if it comes on during normal driving: 
this indicates a malfunction in the sys-
tem. Please consult the nearest BMW 
center.
Indicator lamp flashes: a system over-
load has occurred.
For additional information: refer to 
page 

 

Engine oil level
Comes on while driving and is 
accompanied by an alarm: the 

engine oil level has fallen to the abso-
lute minimum; refill as soon as possible. 
Do not drive more than 30 miles/50 km 
before refilling.
For additional information: refer to 
page 

 

Engine oil level
Comes on after the engine has 
been shut off and is accompa-

nied by an alarm: add engine oil at your 
earliest opportunity, such as when you 
stop to refuel.
For additional information: refer to 
page 

Brake pads

 

●

 

Have the brake pads checked.
For additional information: refer 

to page 

Flat Tire Monitor

 

●

 

The Flat Tire Monitor has been 
deactivated, either at the button 

or in response to a system malfunction. 
In the event of a malfunction, have the 
system checked by your BMW center.
For additional information: refer to 
page 

Online Edition for Part-No. 01 41 0 157 628 - © 09/03 BMW AG