Britax CS Manual Do Utilizador

38

39

Recline the child seat.

1 

Locate the metal buckle strap retainer on the 

2 

bottom of the child seat.
Pull the retainer away from the child seat to 

3 

loosen.
Turn the retainer so the short side will fit 

4 

through the slot in the child seat shell (Fig. A).
Push the retainer through the slots in the 

5 

shell and cover, to the top of the child seat.

Locate the slot in cover and shell for the harness buckle.

1 

Turn the buckle retainer so the short side will fit through the slot in 

2 

the cover and the child seat shell (Fig. A).
Push the retainer through the slots in the shell and cover, to the 

3 

bottom of the child seat.
Pull the harness buckle away from the child seat until tight and 

4 

verify the strap is not twisted and the release button is facing 

outward.

Cleaning the Harness Buckle
If a child eats and drinks while in the child seat, 

the harness buckle may need to be periodically 

checked and cleaned of any food, drink or other 

debris. 

REMOVE BUCKLE as described above.

•

RINSE THOROUGHLY using warm water 

•

(Fig. B).
TEST THE HARNESS BUCKLE by fastening 

•

(Fig. C) and unfastening (Fig. D) until a click 

is heard after inserting each buckle tongue. 

If either click is not heard, repeat cleaning 

procedure.
TOWEL DRY

•

 lubricate, use solvents, abrasive 

cleaners, soap or other household 

detergents.

a

b

c

d