Avaya 9040 Manual Do Utilizador

The following can be programmed against a DSS key via the Admin 
function (see "Programming Functions Against DSS Keys" on page 26).  
 

Access the telephone system directory (see "Using the Directory" on page 
7). This function does not require any data entered when programmed.  

Clears the current connected call. Temporarily pauses the ringing of an 
incoming call. This function does not require any data entered when 
programmed.  

Sets the phone to auto-answer internal calls after a single ring. This 
function does not require any data entered when programmed. When on 
the appropriate DSS key lamp is lit.  

Starts a timer running on the phone's display. This function does not require 
any data entered when programmed. The timer is reset whenever a new 
call is made or answered. When timer mode is selected the appropriate 
DSS key lamp is lit.  

Sets a callback when free on a called busy extension and a callback when 
next used on a called but unanswered extension. This function does not 
require any data entered when programmed. When a callback is set the 
appropriate DSS key lamp is lit. The DSS key can be pressed again to 
cancel the callback.  

Program and relabel the default softkey functions. Program a telephone 
number to dial against a DSS key (see "Storing Abbreviated Dialing Under 
a DSS Key" on page 24).  

Switch call forwarding on/off and set the forwarding number. This function 
can be programmed with or without a target forwarding number.  
If programmed with a forwarding number, pressing the appropriate DSS 
key switches forwarding to that number on.  
If programmed without a forwarding number, pressing the appropriate DSS 
key prompts the user to set a forwarding number and then switch call 
forwarding to that number on.  
In both cases, while call forwarding in on the appropriate DSS key lamp is 
lit and pressing the DSS key again switches call forwarding off.