JVC HR-J291EA Manual Do Utilizador

July 26, 2002 3:18 pm

Page 10

— 10 —

Master Page: Right

A

Make sure the window side is 
up, the rear label side is facing 
you and the arrow on the front of 
the cassette is pointing towards 
the recorder.

● Do not apply too much pressure when inserting.

● The recorder turns on, and the counter is reset, automatically.

● If the cassette’s record safety tab has been removed, playback 

begins automatically.

B

Press 

4.

● If the tape reaches its end during playback, the recorder stops 

playback, rewinds the tape and ejects the cassette, then enters 
the standby mode automatically.

Automatic tracking adjustment
When a new cassette is loaded, the recorder enters the automatic 
tracking mode.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during 
playback, adjust the tracking manually.
Press and hold PR + or – to eliminate the noises.

Your recorder is capable of recording four soundtracks (STEREO, 
LEFT, RIGHT and MONO) and plays back the one you select. Set 
“AUDIO” to the appropriate mode. (

墌

4)

When the tape is not running, press 

3, then press 1. REW 

blinks on the screen. The recorder enters the standby mode 
automatically after rewinding the tape.

During playback, press 

. The recorder stops playback, 

rewinds the tape and ejects the cassette, then enters the standby 
mode automatically.

During playback, press and hold 

. The recorder starts the 

reverse search. Release this button at the point you want repeat 
playback to start. The recorder repeats the selected scene twice.

Press 30 SEC

 once to 6 times during playback. Each press 

initiates a 30-second period of high-speed playback (up to 
3 minutes). When the specified portion of the tape is skipped, 
normal playback resumes automatically. To return to normal 
playback during Skip Search, press 

4.

Turn on the TV and select the AV mode or video channel.

Press 

8 on the remote 

control.

OR Press 

0 on the recorder.

Press 

9.

● The recorder enters Pause mode after moving 2 or 3 frames.

● If there is vertical jitter, use the PR+/– to correct the picture.

● Press 4 to resume normal playback.

● Still picture playback stops automatically after about 5 minutes 

to protect the heads, then normal playback resumes.

Press 

9 to pause, then press 9 repeatedly.

● Press 4 to resume normal playback.

During still picture, press 

e to start forward slow motion 

playback. If you press 

9, still picture resumes.

● Press 4 to resume normal playback.

● Slow motion playback stops automatically after about 30 

seconds to protect the heads, then normal playback resumes.

Press 

3 or 5.

● Press 4 to resume normal playback.

● High-speed search stops automatically after about 3 minutes to 

protect the heads, then normal playback resumes.

Press 

w or e repeatedly.

● Press 4 to resume normal playback.

● Each time you press w or e, the playback speed changes. To 

decrease the speed during picture search, press the opposite 
direction button repeatedly.

● If there is vertical jitter, use the PR+/– to correct the picture.

In the search, still or slow-motion* or frame-by-frame* playback 
mode,

● the picture will be distorted

● the noise bars will appear

● there will be a loss of color with an LP-recorded tape.

Reverse 

search

2 steps

Reverse 

play

Still

Forward 

slow 

motion

1 step

Normal 

play

Forward 

search

 2 steps

Press 

3 or 5.

● If you press and hold 3 or 5 during rewinding or fast-

forwarding, you can see the picture on the screen. Releasing it 
cancels the picture search and resume rewinding and fast-
forwarding.

Press .

Press 

0 on the recorder.

● You can also eject the cassette when the recorder is standby 

mode.

Press 

1 on the remote 

control.

OR Press 

1 on the recorder.

HR-J291_695EA-001EN.fm  Page 10  Friday, July 26, 2002  3:18 PM