JVC HR-S6850EU Manual Do Utilizador

Página de 68
Filename [HRS6850EU1a.fm]
Masterpage:Left
18
 
EN
Page 18
April 12, 2001 9:59 am
PLAYBACK
Basic Playback
A
Load a cassette.
Make sure the window side is up, the rear label side is 
facing you and the arrow on the front of the cassette is 
pointed toward the recorder.
● Do not apply too much pressure when inserting.
● If the record safety tab has been removed, playback begins 
automatically.
● If the record safety tab is intact, the recorder checks the tape 
information for Programme Navigation. For details, refer to 
“Navigation” (
pg. 34).
B
Find the programme start point.
If the tape is advanced past the start point, press 3 or 
turn the JOG dial to the left. To go forward, press 5 or 
turn the JOG dial to the right.
C
Start playback.
Press 
4
. “BEST” appears blinking in the recorder’s front 
display panel during automatic tracking. (
pg. 25)
D
Stop playback.
Press 
8
 on the remote control or 
0
 on the recorder’s 
front panel. Then press 
0
 to remove the cassette.
Turn on the TV and select the video channel (or 
AV mode).
Clean the video heads using a dry cleaning 
cassette — TCL-2UX — when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● “USE CLEANING CASSETTE” appears on the screen (only 
with “O.S.D.” set to “ON” (
pg. 47)).
Usable cassettes
● Compact VHS camcorder recordings can be played on this 
video recorder. Simply place the recorded cassette into a 
VHS Cassette Adapter and it can be used just like any 
full-sized VHS cassette.
● This video recorder can record on regular VHS and Super 
VHS cassettes. While only VHS signals can be recorded on 
regular VHS cassettes*, both VHS and Super VHS signals 
can be recorded and played back using Super VHS 
cassettes.
* By using the S-VHS ET function, it is possible to record and 
play back with S-VHS picture quality on VHS cassettes with 
this recorder.
HRS6850EU1.book  Page 18  Thursday, April 12, 2001  10:16 AM