JVC HR-S6850EU Manual Do Utilizador
Filename [HRS6850EU1a.fm]
Masterpage:Left
22
EN
Page 22
April 12, 2001 9:59 am
RECORDING
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The recorder checks the tape information for Programme
Navigation. For details, refer to “Navigation” (
墌
pg. 34).
B
Choose a programme.
Press PR +/– or the number keys. Or push the JOG dial
and turn it to the left or right to select the channel you
wish to record.
and turn it to the left or right to select the channel you
wish to record.
C
Set the tape speed.
Press SP/LP/EP (
p
). Check the SP/LP/EP indicator on
the recorder’s front display panel to confirm the selected
tape speed.
tape speed.
● In EP mode, the recording time is extended three times.
● If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
recorder.
● It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”
. (
墌
pg. 50
)
D
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
● If “O.S.D.” is set to “ON” (
墌
pg. 47), “MARK” blinks on the
screen while an index code is being marked.
E
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
● You can select channel during the Record Pause mode.
F
Stop recording.
Press
8
on the remote control or
0
on the recorder.
Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
Recording (
墌
pg. 23) or timer recording (
墌
pg. 26, 28, 30),
the recording will resume automatically when power is
restored to the recorder unless the recorder’s memory backup
has expired.
restored to the recorder unless the recorder’s memory backup
has expired.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
the first LP (or EP) recording after inserting the cassette.
(
墌
pg. 25)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
on the TV screen will be recorded (
墌
pg. 48).
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
HRS6850EU1.book Page 22 Thursday, April 12, 2001 10:16 AM