ONKYO TX-NR1000 Manual Do Utilizador

 

103

 

Outputs the source from the speaker 

connected to the CENTER SPEAKERS A terminal.

 

 Outputs the source from the speaker connected to the 

CENTER SPEAKERS B terminal.

 

 Outputs the source from the speakers connected 

to the CENTER SPEAKERS A and  CENTER 
SPEAKERS B terminals.

 

This option configures the surround speakers to use 
when the TX-NR1000/TX-NR5000E plays an input 
source such as DVD-Audio and Super Audio CD. Select 
the speaker terminals to which the speakers you want to 
use are connected. This setting can be made when the 
“(Speaker B) Surr L/R” is set to “Main A” in the 
Speaker Configuration sub-menu.
• When the impedance setting for “Surr L/R A” or “Surr 

L/R B” in the Speaker Impedance sub-menu is set to 
“6 ohms” or “4 ohms,” the available options will be 
“A” and “B.”

 

Outputs the source from the speakers 

connected to the SURR L/R SPEAKERS A terminals.

 

 Outputs the source from the speakers connected to 

the SURR L/R SPEAKERS B terminals.

 

Outputs the source from the speakers connected 

to the SURR L/R SPEAKERS A and SURR L/R 
SPEAKERS B terminals.

 

This option configures the surround back speakers to use 
when the TX-NR1000/TX-NR5000E plays an input 
source such as DVD-Audio and Super Audio CD. Select 
the speaker terminals to which the speakers you want to 
use are connected. This setting can be made when the 
“(Speaker B) Surr Back” is set to “Main A” in the 
Speaker Configuration sub-menu. However, when the 
“(Speaker A) Surr Back” is set to “BTL for Front,” “Bi-
Amp for Front,” or “Not Used,” this setting will not be 
displayed.
• When the impedance setting for “Surr L/R A” or “Surr 

L/R B” in the Speaker Impedance sub-menu is set to 
“6 ohms” or “4 ohms,” the available options will be 
“A” and “B.”

• When the settings for “(Speaker A) Surr Back” and 

“(Speaker B) Surr Back” in the Speaker Configuration 
sub-menu differ, the available options will be “A” and 
“B.”

 

Outputs the source from the speakers 

connected to the SURR BACK L/R SPEAKERS A 
terminals.

 

 Outputs the source from the speakers connected to 

the SURR BACK L/R SPEAKERS B terminals.

 

 Outputs the source from the speakers connected 

to the SURR BACK L/R SPEAKERS A and SURR 
BACK L/R SPEAKERS B terminals.

 

This option configures the subwoofer to use when the 
TX-NR1000/TX-NR5000E plays an input source such 
as DVD-Audio and Super Audio CD. Select the 
terminal to which the subwoofer you want to use is 
connected. This setting can be made when the 
“(Speaker A) Subwoofer” is set to an option other than 
“Not Used” in the Speaker Configuration sub-menu. 
However, when the “(Speaker B) Subwoofer” is set to 
an option other than “Main A” in the Speaker 
Configuration sub-menu, the available options will be 
“A” or “Not Used.”

 

 Outputs the source only from the 

subwoofer connected to the SUBWOOFER PRE OUT 
A terminal.

 

Outputs the source only from the subwoofer 

connected to the SUBWOOFER PRE OUT B terminal.

 

 Outputs the source from the subwoofers 

connected to the SUBWOOFER PRE OUT A and 
SUBWOOFER PRE OUT B terminals.

 

No subwoofers are used for playback.

This sub-menu allows you to configure the audio effect 
and playback options when you play DVD-Audio that is 
input from the i.LINK (AUDIO) interface.

 

This option allows you to set the bass level for the 
i.LINK(IEEE1394):DVD-Audio listening mode. The 
LFE level setting made here will be applied to all of the 
i.LINK(IEEE1394):DVD-Audio input signals. The 
available settings are –

 

∞

 

 dB, –20 dB, –10 dB, and 0 dB. 

The option defaults to “0.” 

 

Selects the enhancement mode for playback when you 
play a 5.1ch source as a 6.1 or higher channel source 
through the TX-NR1000/TX-NR5000E. The surround 
back setting you select here will be applied to the 
i.LINK(IEEE1394):DVD-Audio input signal “*/2.” 
• When the “(Speaker A) Surr Back” is set to “BTL for 

Front,” “Bi-Amp for Front,” or “Not Used” in the 
Speaker Configuration sub-menu, this option will not 
be displayed.

 

 Plays a 5.1ch source as a 6.1 or higher 

channel source using the Dolby Digital EX mode.

 

 Plays a 5.1ch source as a 6.1 or higher 

channel source using the Dolby Pro Logic IIx Movie 
mode. 
• When you set the (Speaker A) Surr Back setting to 

“Main A 1ch (SBL)” in the Speaker Configuration 
sub-menu, you cannot select “PLIIx Movie.”