ONKYO TX-NR1000 Manual Do Utilizador

 

120

 

This menu can be used when connecting to an Onkyo i.LINK (AUDIO)-ready device. 

 

Specify connecting condition on standby of the 
TX-NR1000/TX-NR5000E.

 

To be left connected.

 

To be disconnected while the 

TX-NR1000/TX-NR5000E is on standby to save 
electricity.

 

Even when a DVD player is directly connected to the 
TV, the OSD screen of the TX-NR1000/TX-NR5000E 
can be displayed on the TV monitor if the DVD player 
is an Onkyo i.LINK (AUDIO)-ready device. In this 
case, use the i.LINK cable to connect the i.LINK 
(AUDIO) terminal on the TX-NR1000/TX-NR5000E 
and i.LINK (AUDIO) terminal on the DVD player.

 

Select this to block OSD screen 

display.

 

Select this to display the OSD screen on the left 

side of the TV monitor.

 

Select this to display the OSD screen on the 

right side of the TV monitor.

 

Select the name of the device that should display the 
OSD screen using the [

]/[

] cursor buttons if 

multiple Onkyo i.LINK (AUDIO)-ready devices are 
connected to the TX-NR1000/TX-NR5000E. This item 
does not appear when “Disable” is selected in the OSD 
for DVD setting.
Select “No” when you do not want to select any device.

When listening in Zone 2, the same setting as above is 
available.

 

This menu allows you to enable/disable the i.LINK 
Selector Change function. When an i.LINK (AUDIO)-
enable device is used to playback, this function switches 
the input source to the one assigned to the device.

 

Enables the i.LINK Selector Change function.

 

 Disables the i.LINK Selector 

Change function.

 

This option automatically switches the i.LINK Audio 
Output of Onkyo’s DVD players. With this function 

enabled, audio signals of SACD will be output through 
i.LINK when no source is selected for Zone 2, or it will 
be output in analog format when any source is selected 
for Zone 2.

 

Enables the DVD Output for Zone 2 function.

 

 Disables the DVD Output for Zone 

2 function.