ONKYO TX-NR1000 Manual Do Utilizador

 

16

 

The TX-NR1000/TX-NR5000E’s remote controller is a 
multipurpose device that can be used to control not just 
the TX-NR1000/TX-NR5000E but your other AV 
components as well. This section explains how its 
various operating modes can be used to control the 
TX-NR1000/TX-NR5000E. When you use the Net-
Tune mode, see page 74 for details. See page 124-136 
for information on using the remote controller to control 
Onkyo components connected via 

 and TVs, VCRs, 

and AV components made by other manufacturers.

Amp mode is used to control the TX-NR1000/
TX-NR5000E. 

 

While neither the [INPUT] button nor the [MODE] 
button is illuminated, rolling the scroll wheel changes 
the input source and remote controller mode 
simultaneously.

 

1

 

This button is used to turn on the TX-NR1000/
TX-NR5000E.

 

2

 

This button is used to set the TX-NR1000/
TX-NR5000E to Standby.

 

3

 

These buttons are used to enter numbers and letters.

 

4

 

This button is used to access various settings that 
you can use to customize the operation of the 
remote controller.

 

5

 

This button is used with the Macro function.

 

6

 

This button is used with the scroll wheel to select 
the remote controller modes.

 

7

 

This button is used to adjust the display brightness.

 

8

 

These buttons are used to select items on the 
onscreen setup menus (OSD). The [ENTER] button 
is also used to enter names and to confirm settings.

 

9

 

This button is used to select radio presets.

 

0

 

This button is used to return to the previously 
displayed onscreen setup menu (OSD).

 

A

 

This button is used to display various information 
about the currently selected input source.

 

B

 

For the speakers used in main room A, every press 
of this button toggles the status between enabled 
and disabled.

 

C

 

This button is used to select the THX listening 
modes.

 

D

 

This button is used to select the Dolby and DTS 
listening modes.

+

-

+

-

I