ONKYO TX-NR1000 Manual Do Utilizador

 

25

 

After determining the layout of your speaker system, it 
is now necessary to connect the speakers correctly to 
your TX-NR1000/TX-NR5000E.
For the USA and Canadian models, you can also use 
banana plugs/connectors.

 

Ω

 

Ω

 

• Even if you are using only one speaker or listening to 

monaural (mono) sound, never connect a single speaker 
in parallel to both the right and left channel terminals.

• To prevent circuitry damage, never 

short-circuit the positive (+) and 
negative (–) speaker wire.

• Be sure to connect the positive and 

negative cables for the speakers 
properly. If they are mixed up, the 
left and right signals will be 
reversed and the audio will sound unnatural.

• Do not connect more than one speaker cable to one 

speaker terminal. Doing so may damage the 
TX-NR1000/TX-NR5000E.

 

The terminal wrench that 
comes with this unit is a 
useful tool for tightening/
loosening the speaker 
terminal cap.

 

The positive speaker terminals on the TX-NR1000/
TX-NR5000E are color coded for easy identification. 
Attach the supplied speaker labels to the speaker cables, 
and then match the colors on the speaker cables to the 
corresponding terminals.

 

Front left speaker (+): White
Front right speaker (+): Red
Center speaker (+): Green
Surround left speaker (+): Blue
Surround right speaker (+): Grey
Surround back/Zone 2 left speaker (+): Brown
Surround back/Zone 2 right speaker (+): Tan

5/8"

(15 mm)