ONKYO TX-NR1000 Manual Do Utilizador

 

73

 

• To use Internet radio with the TX-NR1000/

TX-NR5000E, your broadband Internet connection 
needs to be up and running and able to access the 
Web. Please consult your ISP if you have any prob-
lems with your Internet connection.

• The TX-NR1000/TX-NR5000E uses DHCP and AutoIP 

to configure its network settings automatically. If you 
want to configure these settings manually, see page 121.

• The TX-NR1000/TX-NR5000E does not support 

PPPoE settings, so if you have a PPPoE-type Internet 
connection, you must use a PPPoE compatible router.

• Depending on your ISP, you may need to specify a 

proxy server to use Internet radio. If your PC is con-
figured to use a proxy server, use the same settings 
(See page 121).

To connect the TX-NR1000/TX-NR5000E to your Ethernet network, plug one end of a CAT5 Ethernet cable into the 
ETHERNET (Net-Tune) port, and plug the other end into a LAN port on your router or switch.
The following diagram shows how you can connect the TX-NR1000/TX-NR5000E to your Ethernet network. Here it 
is connected to a LAN port on the router, which has a 4-port 100Base-TX switch built-in.
You can connect any number of TX-NR1000/TX-NR5000Es to the network, and Net-Tune Central can serve up to three 
clients simultaneously, so you can enjoy Net-Tune in three separate rooms simultaneously. The following diagram 
shows a Net-Tune network with two TX-NR1000/TX-NR5000Es.

You can install Net-Tune central on several networked computers and use the TX-NR1000/TX-NR5000E’s Select 
Server setting to select the server whose music database you want to access (See page 95).

When you use a broadband router with the DHCP function enabled, the network settings will be configured automati-
cally. In this case, you do not have to make any settings using the setup menu. If you disabled the DHCP function on 
the broadband router, configure the network settings manually referring to page 121.