ONKYO TX-SR 803E Manual Do Utilizador

 

64

 

This section explains how to record the input source and 
how to record audio and video from separate sources.

 

• The surround sound and DSP listening modes cannot 

be recorded.

• Copy-protected DVDs cannot be recorded.

• Sources connected to the multichannel DVD input 

cannot be recorded.

• Various restrictions apply to digital recording. Refer to 

the manuals supplied with your digital recording 
equipment for more details.

• Digital input signals are output by only the digital out-

puts, and analog input signals are output by only the 
analog outputs. There is no internal conversion from 
digital to analog or vice versa.

• DTS signals will be recorded as noise, so don’t 

attempt analog recording of DTS CDs or LDs.

• While the Pure Audio listening mode is selected, the 

VIDEO 1 and 2 OUT V and S jacks don’t output video 
signals, so select another mode when recording.

Audio sources can be recorded to a recorder (e.g., cas-
sette deck, CDR, MD) connected to the TAPE OUT or 
DIGITAL OPTICAL OUT jacks. Video sources can be 
recorded to a video recorder (e.g., VCR, DVD recorder) 
connected to the to VIDEO 1 OUT or VIDEO 2 OUT 
jacks. See pages 25 to 38 for hookup information.

 

• If you select another input source during recording, 

that input source will be recorded.

You can overdub audio onto your video recordings by 
simultaneously recording audio and video from two sep-
arate sources. This is possible because only the audio 
source is switched when an audio-only input source, 
such as TAPE, TUNER, or CD, is selected, the video 
source remains the same.
In the following example, audio from the CD player con-
nected to the CD IN and video from the camcorder con-
nected to the VIDEO 4 INPUT VIDEO jack are recorded 
by the VCR connected to the VIDEO 1 OUT jacks.

 

See “Which Connections Should I 
Use?” on page 25 to see which signals 
can be output and recorded.

You can watch the source while record-
ing. The AV receiver’s VOLUME con-
trol has no effect on recording.

1

2

3

4

6

7

8

9

CD

V1

V4

V2

V3

DVD

TAPE

TUNER

+10

PHONO

 

This selects the CD player as the audio source but 
leaves the camcorder as the video source.

 

Video from the camcorder and audio from the CD 
player are recorded by the VCR.

TX-SR803_En.book Page 64 Friday, August 26, 2005 9:26 AM