Samsung RS2630** Manual Do Utilizador

ADJUSTING THE HEIGHT BETWEEN THE DOORS

Making small level adjustments between doors.

If the freezer door is lower than the

refrigerator door.

If the freezer door is higher than the

refrigerator door.

3) After adjusting the doors, turn the nut (

①) clockwise( ) until the lower end of the bolt, then tighten the

bolt again with the wrench (

➂) to fix the nut(①).

If you do not fix the nut (

①)firmly, the bolt (➁) may be released.

2) Please adjust the height difference between the doors turning the bolt (

➁) clockwise( ) or counter clockwise

( ).

When you turn clockwise (

), the door goes up.

Adjustment location

➂ WRENCH

➀ NUT

➁ BOLT

➀ NUT

➁ BOLT

➂ WRENCH

➁ BOLT

Please open the doors and adjust the doors as follows:

1) Release the nut (

①) on the lower hinge until the upper end of the bolt (➁).

When you release the nut(

①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter-

clockwise. Loosen the nut(

①) with your finger.

NOTE

➀ NUT

DA68-01365A-1.0 5/3/06 9:59 PM Page 22