Sony SA-32SE1 Manual Do Utilizador

If you experience any of the following 
difficulties while using the unit, use this 
troubleshooting guide to help you remedy the 
problem. Should any problem persist, consult 
your nearest Sony dealer.

• Make sure the AC adaptor and the AC 

power cord (mains lead) is connected 
correctly and firmly (page 11).

• Press the ?/1 (POWER) button on the 

unit. The SOUND FIELD indicator lights 
up in green.

• The unit enters standby mode 

automatically when there is no sound input 
for approximately 5 minutes.

• Check that the audio cord of the unit and 

the TV is fully inserted (page 10).

• Press VOL 2 + (or 2 + on the unit) 

repeatedly (page 7).

• Cancel the muting function of the TV.
• Check that headphones are not connected 

to the TV.

• For some TV models, the sound from the 

unit and sound of a TV may not be 
synchronized when sound is output from 
both the unit and TV. Set the sound output 
jack of the TV to “Fixed” if it can be 
switched between “Fixed” and “Variable”. 
Set the TV volume to minimum or mute 
the TV sound and adjust the volume of the 
unit.

• If any other home theatre system is used at 

the same time, turn off the power of the 
unit.

• Press  TV  VOL  2 – repeatedly (page 8).
• Press  VOL  2 – (or 2 – on the unit) 

repeatedly (page 7).

• Someone is using a portable telephone or 

other equipment that emits radio waves 
near the unit. Move the portable telephone, 
etc. away from the unit.

• Point the remote control at the remote 

control sensor on the unit (page 7).

• Remove any obstacles in the path between 

the remote control and the unit.

• Replace all the batteries in the remote 

control with new ones, if they are weak.