Poulan 271491 Manual Do Utilizador
4
SAFETY RULES
Look for this symbol to point out
im por tant safety precautions. It means
CAU TION!!! BECOME ALERT!!! YOUR
SAFE TY IS INVOLVED.
CAU TION!!! BECOME ALERT!!! YOUR
SAFE TY IS INVOLVED.
CAUTION: In order to prevent ac-
cidental starting when setting up, trans-
port ing, ad just ing or making repairs,
always dis con nect spark plug wire and
place wire where it can not contact spark
plug.
port ing, ad just ing or making repairs,
always dis con nect spark plug wire and
place wire where it can not contact spark
plug.
CAUTION: Do not coast down a hill in
neutral, you may lose control of the tractor.
CAUTION: Tow only the attachments
that are rec om mend ed by and comply with
spec i fi
spec i fi
ca tions of the man u fac tur er of your
tractor. Use common sense when towing.
Operate only at the lowest possible speed
when on a slope. Too heavy of a load,
while on a slope, is dan ger ous. Tires can
lose trac tion with the ground and cause
you to lose control of your tractor.
Operate only at the lowest possible speed
when on a slope. Too heavy of a load,
while on a slope, is dan ger ous. Tires can
lose trac tion with the ground and cause
you to lose control of your tractor.
WARNING: Engine exhaust, some
of its constituents, and certain vehicle
com po nents contain or emit chem i cals
known to the State of Cal i for nia to cause
can cer and birth defects or oth er re pro duc-
tive harm.
com po nents contain or emit chem i cals
known to the State of Cal i for nia to cause
can cer and birth defects or oth er re pro duc-
tive harm.
WARNING: Battery posts, terminals
and related accessories contain lead and
lead compounds, chemicals known to the
State of Cal i for nia to cause can cer and
birth defects or oth er re pro duc tive harm.
Wash hands after handling.
lead compounds, chemicals known to the
State of Cal i for nia to cause can cer and
birth defects or oth er re pro duc tive harm.
Wash hands after handling.
• Avoid starting or stopping on a slope. If
tires lose traction, dis en gage the blades
and proceed slowly straight down the
slope.
and proceed slowly straight down the
slope.
• If machine stops while going uphill,
disengage blades, shift into reverse and
back down slowly.
back down slowly.
• Do not turn on slopes unless nec es sary,
and then, turn slowly and grad u al ly
downhill, if possible.
downhill, if possible.