Toshiba 3511 Manual Do Utilizador
50
2.HOW TO MAKE COPIES
2.SETTING ORIGINALS (Cont.)
2
In the Continuous Feed Mode
* See "Continuous Feed Mode" Page 137
* To set originals with the different size, see "Setting the [MIXED ORIGINAL SIZE]" Page 70
* To set originals with the different size, see "Setting the [MIXED ORIGINAL SIZE]" Page 70
1
After aligning the edges of originals, place
the originals face up and align the slides
to their width.
the originals face up and align the slides
to their width.
- Align the originals in order from the top because they will be fed
from the top.
- One original sheet is also acceptable.
- Maximum number of sheets (all sizes) that can be set in the
- Maximum number of sheets (all sizes) that can be set in the
reversing automatic document feeder: 100 sheets (50-80 g/m
2
) or
less than 16 mm in height.
- To set the mixed-sized originals, see "Setting the [MIXED
ORIGINAL SIZE]" Page 70.
- Use the original stopper as required.
When the number of originals is too large to be set at one time, you
can divide the originals into several sets and set them one after
another. To do so, place the first set of originals first and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals.
can divide the originals into several sets and set them one after
another. To do so, place the first set of originals first and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals.