Toshiba 3511 Manual Do Utilizador
87
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole
punch your copies.
punch your copies.
* The paper weight should be in the range of 17 lb. Bond to 110 lb. Index. Special paper such as OHP files
or labels is excluded.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
- When using this mode in bypass copying ("Bypass Copying"
- When using this mode in bypass copying ("Bypass Copying"
Page 60), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 47
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
menu as shown in the illustration on the
right (highlighted).
4
Press the [HOLE PUNCH] button.
z
Select other copy modes as required.
5
Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
* The paper mentioned above is Toshiba-recommended paper.
Specifications and appearance are subject to change without
notice in the interest of product improvement
notice in the interest of product improvement
Number of punch holes and hole
diameter
Available paper size
North America
(MJ-6004N)
(MJ-6004N)
2/3 holes switchable
(0.315” dia.)
(0.315” dia.)
2 holes: LG, LT-R, A4-R
3 holes: LD, LT, A3, A4
3 holes: LD, LT, A3, A4