Audio Research Reference 5 REF 5 Folheto
Códigos do produto
REF 5
Reference 5 Specifications:
FREQUENCY RESPONSE:
+0 -3dB 0.2Hz to 200kHz at
rated output. (BALANCED,
200k ohms load.)
+0 -3dB 0.2Hz to 200kHz at
rated output. (BALANCED,
200k ohms load.)
DISTORTION: Less than
.01% at 2V RMS Balanced
output.
.01% at 2V RMS Balanced
output.
GAIN: Main output (SE or
BAL input): 12dB Balanced
output, 6dB Single Ended
output. Tape output: 0dB.
(Processor input: 0dB
Balanced.)
BAL input): 12dB Balanced
output, 6dB Single Ended
output. Tape output: 0dB.
(Processor input: 0dB
Balanced.)
INPUT IMPEDANCE: 120K
ohms Balanced, 300K ohms
SE, Inputs (7): CD, TUNER,
VIDEO, PHONO, AUX1,
AUX2, PROCESSOR. (XLR
and RCA connectors).
ohms Balanced, 300K ohms
SE, Inputs (7): CD, TUNER,
VIDEO, PHONO, AUX1,
AUX2, PROCESSOR. (XLR
and RCA connectors).
OUTPUT IMPEDANCE:
600 ohms Balanced, 300
ohms SE main (2), 20K
ohms minimum load and
2000pF maximum
capacitance. Outputs (3): 2
main, 1 tape (XLR and RCA
connectors).
600 ohms Balanced, 300
ohms SE main (2), 20K
ohms minimum load and
2000pF maximum
capacitance. Outputs (3): 2
main, 1 tape (XLR and RCA
connectors).
OUTPUT POLARITY: Non-
inverting.
inverting.
MAXIMUM INPUT: 20V
RMS maximum Balanced,
(10V RMS SE).
RMS maximum Balanced,
(10V RMS SE).
RATED OUTPUTS: 2V
RMS (1V RMS SE) into
200K ohm balanced load
(maximum balanced output
capability is 30V RMS at
less than 0.5% THD at
1kHz).
RMS (1V RMS SE) into
200K ohm balanced load
(maximum balanced output
capability is 30V RMS at
less than 0.5% THD at
1kHz).
CROSSTALK: -80DB or
better at 1kHz and 10kHz.
better at 1kHz and 10kHz.
CONTROLS: Volume (104
steps), Select Input. Push
Buttons: Power, Proc,
BAL/SE, Mono, Invert,
Mute.
steps), Select Input. Push
Buttons: Power, Proc,
BAL/SE, Mono, Invert,
Mute.
POWER SUPPLIES:
Electronically regulated low
and high voltage supplies.
Automatic 40 sec. warm-
up/brown-out mute. Line
regulation better than .01%.
Electronically regulated low
and high voltage supplies.
Automatic 40 sec. warm-
up/brown-out mute. Line
regulation better than .01%.
NOISE: 1.7uV RMS residual
IHF weighted balanced
equivalent input noise with
volume at 1 (109dB below
2V RMS output.)
IHF weighted balanced
equivalent input noise with
volume at 1 (109dB below
2V RMS output.)
TUBE COMPLEMENT: (4) -
6H30P dual triodes, plus (1
each) 6550C and 6H30P in
power supply.
6H30P dual triodes, plus (1
each) 6550C and 6H30P in
power supply.
POWER REQUIREMENTS:
100-135VAC 60Hz (200-
270VAC 50/60Hz) 130
watts.
100-135VAC 60Hz (200-
270VAC 50/60Hz) 130
watts.
DIMENSIONS: 19" (48 cm)
W x 7" (17.8 cm) H
(standard panel) x 15.5"
(39.4 cm) D. Handles extend
1.5" (3.8 cm) forward of the
front panel.
W x 7" (17.8 cm) H
(standard panel) x 15.5"
(39.4 cm) D. Handles extend
1.5" (3.8 cm) forward of the
front panel.
WEIGHT: 30.4 lbs. (13.9 kg)
Net; 41.6 lbs. (19 kg)
Shipping.
Net; 41.6 lbs. (19 kg)
Shipping.
Specifications subject to
change without notice.
change without notice.
●
●
●
●
●
●
●
●
●
Audio Research Corporation
3900 Annapolis Lane North
Plymouth, Minnesota USA 55447-5447
Phone: 763-577-9700 Fax: 763-577-0323
www.audioresearch.com
©2009 Audio Research
Plymouth, Minnesota USA 55447-5447
Phone: 763-577-9700 Fax: 763-577-0323
www.audioresearch.com
©2009 Audio Research