ZyXEL Prestige 660RC-61 ADSL 130121.0660RC61 Manual Do Utilizador

Prestige 660R-6xC Series User’s Guide

Chapter 13 Introducing the SMT

116

Several operations that you should be familiar with before you attempt to modify the 
configuration are listed in the table below.

Table 30   Navigating the SMT Interface

Move down to 

another menu

[ENTER]

To move forward to a submenu, type in the number of the 

desired submenu and press [ENTER].

Move up to a 

previous menu

[ESC]

Press [ESC] to move back to the previous menu.

Move to a hidden 

menu

Press [SPACE 

BAR] to change 

No to Yes then 

press [ENTER].

Fields beginning with "Edit" lead to hidden menus and have a 

default setting of No. Press [SPACE BAR] once to change No 

to Yes, then press [ENTER] to go to the  "hidden" menu.

Move the cursor

[ENTER] or [UP]/

[DOWN] arrow 

keys.

Within a menu, press [ENTER] to move to the next field. You 

can also use the [UP]/[DOWN] arrow keys to move to the 

previous and the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to 

move to the bottom of a menu.

Entering 

information

Type in or press 

[SPACE BAR], 

then press 

[ENTER].

You need to fill in two types of fields. The first requires you to 

type in the appropriate information. The second allows you to 

cycle through the available choices by pressing [SPACE BAR].

Required fields

<

?

 > or 

All fields with the symbol <?> must be filled in order to be able 

to save the new configuration.
All fields with ChangeMe must not be left blank in order to be 

able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol 

refers to an option that is Not Applicable.

Save your 

configuration

[ENTER]

Save your configuration by pressing [ENTER] at the message 

"Press ENTER to confirm or ESC to cancel". Saving the data on 

the screen will take you, in most cases to the previous menu. 
Make sure you save your settings in each screen that you 

configure.

Exit the SMT

Type 99, then press [ENTER].Type 99 at the main menu prompt 

and press [ENTER] to exit the SMT interface.