Cisco 5508 AIR-CT5508-HA-K9 Ficha De Dados

Códigos do produto
AIR-CT5508-HA-K9
Página de 9
 
 
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 
Page 7 of 9 
Installing License on Cisco WCS Server 
Follow these steps to install a license file. If you need additional help, contact Cisco Technical Assistance Center 
(TAC) at 800 553-2447 or 
. 
1.  Install Cisco WCS software if not already completed. 
2.  Save the license file (.lic) to a temporary directory on your hard drive. (You will receive an email from Cisco 
with an attached license file) 
3.  Open a supported version of the Internet Explorer browser. 
4.  In the location or address field, enter the following URL, replacing IP address with the IP address or host name 
of the Cisco WCS server: https: // <IP address>
5.  Log in to the Cisco WCS server as system administrator. (Be aware that usernames and passwords are case-
sensitive.) 
6.  From the Help menu, select Licensing
7.  On the Licensing page, from the Command menu, select Add License
8.  On the Add License page, click Browse to navigate to the location where you saved the .lic file. 
9.  Click Download. The Cisco WCS server imports the license. 
Table 7 shows the optional DTLS license for Cisco 5500 Series Wireless Controllers. 
Datagram Transport Layer Security (DTLS) is required for all OfficeExtend deployments to encrypt the Data Plane 
traffic. Customers planning to install this device physically in Russia must order the controller with DTLS 
disabled and then obtain a physical PAK in order to enable a DTLS license and should not download the 
license from Cisco.com. Please consult your local government regulations to ensure that Data DTLS encryption 
is permitted. 
If a customer chooses SWC5500K9-60, SWC5500K9-70 or SWC5500K9-72, DTLS Data Encryption is enabled by 
default. When a customer orders the 5500 Series and chooses either SWC5500LPE-K9-70 or SWC5500LPE-K9-
72 in the Optional Licenses tab, data DTLS Encryption is disabled. 
The DTLS Paper PAK license is designated for customers who purchase a controller with DTLS disabled due to 
import restrictions but get permission to add DTLS support after initial purchase. This optional DTLS license is 
required for Cisco OfficeExtend deployment. 
Table 7. 
Optional Licensing for Cisco 5500 Series Wireless Controllers (PAKs) 
Part Number 
Description 
LIC-CT5508-LPE-K9 
5508 Wireless Controller DTLS License (Paper PAK) 
L-LIC-CT55-LPE-K9= 
Cisco 5508 Controller DTLS License (electronic Certificate) 
Other customers can simply use the procedure outlined below in order to download the DTLS license from 
Cisco.com. 
To obtain a data DTLS license, follow these steps: 
Step 1.   Browse to 
Step 2.   On the Product License Registration page, choose Licenses Not Requiring a PAK 
Step 3.   Choose Cisco Wireless Controllers DTLS License under Wireless 
Step 4.   Complete the remaining steps to generate the license file. The license will be provided online or via email