Sanyo Portable LCD Colour Data Projector PLC-XP41 PLC-XP41 Manual Do Utilizador

DVI-D terminal

USB terminal

Component terminal

Shipping case
POA-CC-XP40

Low ceiling 
mount bracket
POA-CHS302

High ceiling 
mount bracket
POA-CHL302

Note: Comparative images used in this catalog are not actual projected images.

Installation example

Example of POA-PN01 connection

The high-performance 275-watt short-arc NSH lamp*1 light 
source is enhanced by the built-in microlenses of the 1.3-inch 

XGA polysilicon liquid crystal panels to 
achieve an on-screen brightness level of 
4100 ANSI lumens*2, making these pro-
jectors ideal for large meeting rooms, 
conference halls or classrooms.

*1  XP46/XP41 only.  *2  XP46 brightness.

Polarized scattering is corrected 
as the light passes through the 
panels, ensuring high-contrast 
on-screen color reproduction with 
solid black. A contrast ratio of 
800:1* ensures that these projec-
tors offer more natural image re-
production with finer gradation.

*XP46/XP45

This leading-edge signal processing technology analyzes the 
incoming signal and controls the amount of correction accord-
ingly. The result is sharp yet natural-looking images.

Compared with conventional methods, SANYO s new 3D 
Automatic Uniformity Correction Control offers more than ten-
times the level of control over color problems caused by lack 
of brightness conformity. This helps to ensure natural-looking 
gradation.

A warning message is sent to the maintenance staff or user if 
the projector malfunctions, or if it is time to replace a lamp.

You can program the days and times of projector use (maxi-
mum 10 events) so that the projector will automatically 
switch on and off. The timer can be programmed to run every 
day or every week, or for specific days.

Using a web browser application, you can check on the condi-
tion of the projector or adjust the controls in the following 
ways: Projector condition: lamp use time, projector use time, 
in-store condition, power supply, input information
Projector controls: power (on/off), input mode, PC, system, 
image, and other settings 
Saving/downloading of settings: input mode, system, im-
age and screen settings can be stored or downloaded

Up to 99 projectors can be operated from a single computer 
without the need for any special control boxes or software.

PJ-Net Organizer is equipped with an RS-232C serial commu-
nications port. This allows control of peripheral appliances that 
are similarly equipped with a serial port*.

*Serial port setting required. Special driver software, etc., may be needed (not provided with the POA-PN01).

SANYO technology enhances the video projection capabilities 
of these models. 3D sampling for each pixel together with 
SANYO s unique movement detection algorithm program lead 
to increased horizontal resolution and increased diagonal 
resolution on moving images.

This circuit enhances resolution and reduces noise on moving 
images to produce a clearer, finer picture.

Luminance noise and chrominance noise in the video signal 
are filtered out by this circuit to ensure finer on-screen colors 
without flicker.

Enlarged section
Max. 49x (surface ratio)

Compressed image
Max. 1/4 size (surface ratio)

Actual image

*Digital compression applies only to computer images

You can move the projected image up 
and down on the screen without physi-
cally moving the projector thanks to the 
power-driven lens shift. This makes it 
easy to center the image on screen ready 
for your presentation.

*Shift ratio (up/down) of 10:0 to 1:1. However 1:1 fixed with 

LNS-W32 lens

Designed for straightforward use, the GUI provides a choice of 
11 languages (English, German, French, Italian, Spanish, 
Portuguese, Dutch, Swedish, Chinese, Korean, and Japanese).

Eco mode* offers quiet operation with low energy 
consumption. If quietness is a prime concern, there is no 
need to worry that loud bursts of fan activity will disturb the 
presentation.

*XP46/XP41 only. 

Brightness is approximately 80 percent of normal levels.

In addition to the 1.3x power-driven zoom focus, these 
projectors feature digital zoom functions* that magnify a 
section of the screen image by up to 49-times (surface ratio). 
You can also compress the screen image down to a 
maximum of 1/4 its original size (surface ratio) to 
accommodate your setup parameters.

In addition to up/down keystone correction (maximum –40 
degrees), SANYO has added left/right keystone correction* 
(maximum –10 degrees) to these new models. This makes it 
possible to project correct-looking images even if the 
projector is not directly in front of the screen.

*XP46/XP41 only
  Left/right keystoning cannot be corrected beyond a 10:0 offset ratio.
*On screen image size after correction is smaller than that of the original.
*Correctable range varies according to input signal and digital zoom magnification, etc.

These projectors* can be connected to 
a computer network via the PJ-Net 
Organizer (POA-PN01, sold separately) 
for management and control capabilities. 
Projectors located in several different 
locations can be controlled from a single 
computer using your normal web 
browser — there is no need for any 
special software.

*XP46/XP41 only, connection terminal provided. 
  PJ-Net  Organizer is not compatible with the XP45 and XP40.

SANYO offers three optional lens types for these projectors: a 
fixed short-focus lens, a short-focus zoom lens, and a long-fo-
cus zoom lens. By replacing the original standard lens, you 
can adapt the projector to your needs.

Fixed short-focus

Short-focus zoom

Long-focus zoom

These projectors are equipped with an 
extensive array of input terminals to 
suit a range of projection sources. 
DVI-D is optimized for PC input. A 
USB port is included together with the 
control port. And there is a 
component input for high-definition 
signals*.

*Digital compression

   On start    Presentation support features    Digital resizing 
   Rear/ceiling-mounted projection    Built-in stereo amplifier 
and speakers    Wireless/Wired remote control with mouse 
functions and built-in laser pointer

DOS/V cable 
(1.8m, mini D-sub 15-pin, male-male type)
Mac and PC-98 adapters (male-female type)

10m length, mini D-sub 15-pin (male-female 
type)

Mac adapter for use with included analog RGB 
cable, 13”, 16”, 19”, 21” mode compatible

Mac cable, 2.7m, mini DIN 8-pin (male), mini 
DIN 4-pin (male)

Serial cable, 2.7m, mini DIN 8-pin (male), mini 
D-sub 9-pin (female)

10m length, mini DIN 8-pin (male), mini DIN 8-
pin (female)

KA-LCV-101KZ

KA-LCV-81KZ

KA-LCV-61KZ

KA-LCV-102SP

KA-LCV-82SP

KA-LCV-81RU

KA-CB-KIT

KA-MC-DB10

POA-MACAP

POA-MCMAC

POA-MCSRL

POA-MC10

0.88

0.88

0.88

1.8

1.8

2.2

100

80

60

100

80

80

Special I/O adapters may be required for certain notebook computers. 

Type
Model
Focal distance
F value
Max. Diameter
Weight
Lens shift
Zoom/Focus

40”
60”
70”
80”
90”

100”
110”
120”
150”
170”
200”
250”
300”
350”
400”

LNS-W32
f=22.3mm

F2.5

ø175mm

1.6kg

1 : 1 (Fixed)

Fixed/Hand-operated

Throw distance

−
−

1.2m
1.3m
1.5m
1.7m
1.8m
2.0m

−
−
−
−
−
−
−

LNS-W31A

f=34–48mm

F2.5–F3.1

ø99mm

1.7kg

Approx. 10 : 0 – 1 : 1
Motor driven 1.4x/Motor driven

LNS-T31A

f=64–112mm

F2.0–F2.9

ø99.5mm

1.9kg

Approx. 10 : 0 – 1 : 1
Motor driven 1.8x/Motor driven

Approx. throw distance

*1

Pcture size

Max.

Zoom

1.0m
1.5m
1.8m
2.0m
2.3m
2.5m
2.8m
3.1m
3.8m
4.4m
5.1m
6.4m
7.7m
9.0m

10.3m

Max.

Zoom

1.8m
2.7m
3.2m
3.7m
4.2m
4.7m
5.1m
5.6m
7.1m
8.0m
9.5m

11.9m
14.3m
16.7m
19.1m

Min.

Zoom

1.4m
2.2m
2.5m
2.9m
3.3m
3.6m
4.0m
4.4m
5.5m
6.2m
7.3m
9.2m

11.0m
12.9m
14.7m

Min.

Zoom

3.3m
5.0m
5.9m
6.7m
7.6m
8.4m
9.3m

10.2m
12.7m
14.4m
17.0m
21.3m
25.6m
29.9m
34.2m

*

1 

Lens throw distances quoted here are subject to 3% 

variation. 
*  Performance may be affected outside the stack point range. 

Dedicated connection terminal
 (projector side)