Hitachi 100GB 7200 RPM HTE721010G9SA00 Manual Do Utilizador
Códigos do produto
HTE721010G9SA00
Travelstar E7K100 (SATA) Hard Disk Drive Specification
155
12.40.2.4 Self-test execution status
12.40.2.5 Total time in seconds to complete off-line data collection activity
This field tells the host how many seconds the device requires to complete the off-line data collection activity.
12.40.2.6 Current segment pointer
This byte is a counter indicating the next segment to execute as an off-line data collection activity. Because the
number of segments is 1, 01h is always returned in this field.
number of segments is 1, 01h is always returned in this field.
12.40.2.7 Off-line data collection capability
Bit
Definition
0
Execute Off-line Immediate implemented bit
0
S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
1
S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
1
Enable/disable Automatic Off-line implemented bit
0 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
1
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
2
Abort/restart off-line by host bit
0
The device will suspend off-line data collection activity after an interrupting command and resume
it after a vendor specific event
it after a vendor specific event
1
The device will abort off-line data collection activity upon receipt of a new command
Bit
Definition
0-3
Percent Self-test remaining. An approximation of the percent of the self-test routine remaining until
completion given in ten percent increments. Valid values are 0 through 9.
completion given in ten percent increments. Valid values are 0 through 9.
4-7
Current Self-test execution status.
0 The self-test routine completed without error or has never been run.
1 The self-test routine was aborted by the host.
2 The self-test routine was interrupted by the host with a hard or soft reset.
3 The device was unable to complete the self-test routine due to a fatal error or unknown test error.
4 The self-test routine was completed with an unknown element failure.
5 The self-test routine was completed with an electrical element failure.
6 The self-test routine was completed with a servo element failure.
7 The self-test routine was completed with a read element failure.
15 The self-test routine is in progress.