ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Códigos do produto

91-004-247008B

Prestige 791R G.SHDSL Router

NAT

11-7

Menu 11.3 - Remote Node Network Layer Options

IP Options: Bridge Options:

IP Address Assignment = Dynamic Ethernet Addr Timeout(min)= N/A

Rem IP Addr = 0.0.0.0

Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A

NAT= SUA Only

Address Mapping Set= N/A

Metric= 2

Private= No

RIP Direction= None
Version= RIP-1

Multicast= None

IP Policies=

Enter here to CONFIRM or ESC to CANCEL:

Step 2. Move the cursor to the Edit IP/IPX/Bridge field, press [SPACE BAR] to select Yes and then

press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options. Use the space
bar to toggle through the selections for NAT and choose the option you want.

Figure 11-4 Applying NAT to the Remote Node

Table 11-3 Applying NAT to the Remote Node

FIELD DESCRIPTION EXAMPLE

Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your Prestige. The SMT
uses the address mapping set that you configure and enter in the
Address Mapping Set field (menu 15.1 - see section 11.3.1).

Full Feature

Select None to disable NAT.

None

NAT

When you select SUA Only, the SMT uses Address Mapping Set 255
(menu 15.1 - see section 11.3.1). Choose SUA Only if you have just
one public WAN IP address for your Prestige.

SUA Only

11.3 NAT Setup

Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global
addresses to computers on the LAN. You can see two NAT Address Mapping sets in menu 15.1. You can
only configure Set 1. Set 255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the