ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Códigos do produto
91-004-247008B
Página de 238
Prestige 791R G.SHDSL Router 
12.3.1 TCP/IP Filter Rule 
This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on 
the fields in the IP and the upper layer protocol, for example, UDP and TCP headers. 
To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press [ENTER] to 
open Menu 21.1.1 – TCP/IP Filter Rule, as shown next. 
 
Figure 12-11 TCP/IP Filter Rule 
Table 12-3 TCP/IP Filter Rule 
FIELD DESCRIPTION 
EXAMPLE 
Filter # 
This is the filter set, filter rule coordinates, for instance, 2, 
3 refers to the second filter set and the third filter rule of 
that set. 
1,1 
Filter Type 
Use [SPACE BAR] and then [ENTER] to choose a rule. 
Parameters displayed for each type will be different. 
Choices are TCP/IP Filter Rule or Generic Filter Rule
TCP/IP Filter Rule 
Active 
Select Yes to activate or No to deactivate the filter rule. 
No 
(default) 
Menu 21.1.1 - TCP/IP Filter Rule 
Filter #: 1,1 
Filter Type= TCP/IP Filter Rule 
Active= Yes 
IP Protocol= 6      IP Source Route= No 
Destination: IP Addr= 0.0.0.0 
IP Mask= 0.0.0.0 
Port #= 137 
Port # Comp= Equal 
             Source: IP Addr= 0.0.0.0 
IP Mask= 0.0.0.0 
Port #= 0 
Port # Comp= None 
TCP Estab= No 
More= No             Log= None 
Action Matched= Check Next Rule 
Action Not Matched= Check Next Rule 
 
 
Press ENTER to Confirm or ESC to Cancel: 
 
Press Space Bar to Toggle. 
12-10  
 
Filter Configuration