ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

System Maintenance 

 

14-7 

UNIX Syslog: 

 

Active  Use [SPACE BAR] and then [ENTER] to turn syslog on or off. 

Syslog IP Address  Type the IP address of your syslog server. 

Log Facility  Use [SPACE BAR] and then [ENTER] to select one of seven different local options. 

The log facility lets you log the message in different server files. Refer to your UNIX 
manual. 

Types:  

CDR  Call Detail Record (CDR) logs all data phone line activity if set to Yes. 

Packet Triggered  The first 48 bytes or octets and protocol type of the triggering packet is sent to the 

UNIX syslog server when this field is set to Yes. 

Filter Log  No filters are logged when this field is set to No. Filters with the individual filter Log 

Filter field set to Yes are logged when this field is set to Yes. 

PPP Log  PPP events are logged when this field is set to Yes. 

The following are examples of the four types of syslog messages sent by the Prestige: 

SdcmdSyslogSend ( SYSLOG_CDR, SYSLOG_INFO, String); 
String = board xx line xx channel xx, call xx, str 
board = the hardware board ID 
line = the WAN ID in a board 
Channel = channel ID within the WAN 
call = the call reference number which starts from 1 and increments by 1 for each new call 
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.) 
 

C01 Incoming Call xxxxBps xxxxx (L2TP, xxxxx = Remote Call ID) 

 

C01 Incoming Call xxxx (= connected speed) xxxxx (= Remote Call ID) 

 

L02 Tunnel Connected (L2TP) 

 

C02 OutCall Connected xxxx (= connected speed) xxxxx (= Remote Call ID) 

 

C02 CLID call refused 

 

L02 Call Terminated 

 

C02 Call Terminated 

Jul 19 11:19:27 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0 

40002 

Jul 19 11:19:32 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C02 OutCall Connected 64000 

40002 

Jul 19 11:20:06 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C02 Call Terminated 

SdcmdSyslogSend (SYSLOG_PKTTRI, SYSLOG_NOTICE, String); 
 

String = Packet trigger: Protocol=xx Data=xxxxxxxxxx…..x 

 

Protocol: (1:IP 2:IPX 3:IPXHC 4:BPDU 5:ATALK 6:IPNG) 

 

Data: We will send forty-eight Hex characters to the server 

Jul 19 11:28:39 192.168.102.2 ZYXEL: Packet Trigger: Protocol=1, 

Data=4500003c100100001f010004c0a86614ca849a7b08004a5c020001006162636465666768696a6b6c6d6e6f70717273

74