ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Códigos do produto
91-004-247008B
Página de 238
Prestige 791R G.SHDSL Router 
3-10  
Initial 
Setup 
FIELD DESCRIPTION 
EXAMPLE 
Domain Name 
Enter the domain name (if you know it) here. If you leave this field 
blank, the ISP may assign a domain name via DHCP. You can go to 
menu 24.8 and type "sys domainname" to see the current domain 
name used by your gateway. 
If you want to clear this field just press the [SPACE BAR]. The domain 
name entered by you is given priority over the ISP assigned domain 
name. 
zyxel.com.tw
Edit Dynamic DNS   Press the [SPACE BAR] to select Yes or No (default). Select Yes to 
configure Menu 1.1 — Configure Dynamic DNS (discussed next). 
No 
Route IP 
Set this field to Yes to enable or No to disable IP routing.  You must 
enable IP routing for Internet access.   
Yes 
Bridge 
Turn on/off bridging for protocols not supported (for example, SNA) or 
not turned on in the previous Route IP field.  Select Yes to turn 
bridging on; select No to turn bridging off.  
No 
3.5.3  Procedure to Configure Dynamic DNS 
If you have a private WAN IP address, then you cannot use Dynamic DNS. 
Step 1. 
To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit 
Dynamic DNS
 field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as 
shown next.  
Menu 1.1 - Configure Dynamic DNS  
Service Provider = WWW.DynDNS.ORG 
Active= Yes 
Host= me.ddns.org 
EMAIL= mail@mailserver 
USER= username 
Password= ********* 
Enable Wildcard= No 
 
 
Press ENTER to confirm or ESC to cancel: 
Figure 3-6 Configure Dynamic DNS  
Follow the instructions in the next table to configure Dynamic DNS parameters.