ZyXEL Prestige 660HW-D1 Wireless Router 91-004-593003B Manual Do Utilizador

P-660H/HW-D Series User’s Guide

Chapter 7 Wireless LAN

112

Note: If you are configuring the ZyXEL Device from a computer connected to the 

wireless LAN and you change the ZyXEL Device’s SSID or WEP settings, you 
will lose your wireless connection when you press Apply to confirm. You must 
then change the wireless settings of your computer to match the ZyXEL 
Device’s new settings.

Click Network > Wireless LAN to open the General screen.

Figure 57   Wireless LAN: General 

The following table describes the general wireless LAN labels in this screen.

Table 32   Wireless LAN: General

Active Wireless 

LAN

Click the check box to activate wireless LAN.

Network 

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless client 

is associated. Wireless clients associating to the access point (AP) must have the 

same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for 

the wireless LAN. 

Note: If you are configuring the ZyXEL Device from a computer 

connected to the wireless LAN and you change the ZyXEL 
Device’s SSID or WEP settings, you will lose your wireless 
connection when you press Apply to confirm. You must then 
change the wireless settings of your computer to match the 
ZyXEL Device’s new settings.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box.