ZyXEL Prestige 660HW-D1 Wireless Router 91-004-593003B Manual Do Utilizador

P-660H/HW-D Series User’s Guide

309

Appendix J Splitters and Microfilters

2 Connect a cable from the wall jack to the “wall side” of the microfilter.

3 Connect the “phone side” of the microfilter to your telephone as shown in the following 

figure.

4 After you are done, make sure that your telephone works. If your telephone does not 

work, disconnect the microfilter and contact either your local telephone company or the 
provider of the microfilter.

Figure 180   Connecting a Microfilter

You can also use a Y-Connector with a microfilter in order to connect both your modem and a 
telephone to the same wall jack without using a POTS splitter.

1 Connect a phone cable from the wall jack to the single jack end of the Y-Connector.

2 Connect a cable from the double jack end of the Y-Connector to the “wall side” of the 

microfilter.

3 Connect another cable from the double jack end of the Y-Connector to the ZyXEL 

Device.

4 Connect the “phone side” of the microfilter to your telephone as shown in the following 

figure.

Figure 181   Connecting a Microfilter and Y-Connector