ZyXEL Prestige 660HW-D1 Wireless Router 91-004-593003B Manual Do Utilizador

P-660H/HW-D Series User’s Guide

Chapter 2 Introducing the Web Configurator

44

Figure 7   Select a Mode

Note: The management session automatically times out when the time period set in 

the Administrator Inactivity Timer field expires (default five minutes). Simply 
log back into the ZyXEL Device if this happens to you.

If you forget your password or cannot access the web configurator, you will need to use the 
RESET button at the back of the ZyXEL Device to reload the factory-default configuration 
file. This means that you will lose all configurations that you had previously and the password 
will be reset to “1234”.

1 Make sure the POWER LED is on (not blinking).

2 Press the RESET button for ten seconds or until the POWER LED begins to blink and 

then release it. When the POWER LED begins to blink, the defaults have been restored 
and the ZyXEL Device restarts.

We use the P-660HW-D1 web screens in this guide as an example. Screens vary slightly for 
different ZyXEL Device models. 

After you enter the admin password, use the sub-menus on the navigation panel to configure 
ZyXEL Device features. The following table describes the sub-menus.