Philips Micro Hi-Fi System MC127 MC127/05 Manual Do Utilizador
Códigos do produto
MC127/05
12
Turn on
Press POWER.
»
The unit switches to the last selected
source.
Switch to standby
Press POWER again to switch the unit to
standby mode.
»
The red standby indicator turns on.
»
The backlight on the display panel
turns off.
4 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
1
2
3
1
2
3
EN