ZyXEL Prestige 792H SDSL Router 91-004-342004B Manual Do Utilizador

Prestige 792H G.SHDSL Router 

Dial Backup 

 

21-9 

Private 

This parameter determines if the Prestige will include the route to this 
remote node in its RIP broadcasts. If set to Yes, this route is kept private 
and not included in RIP broadcasts. If No, the route to this remote node 
will be propagated to other hosts through RIP broadcasts. 

No 

(default) 

RIP 
Direction  

Press [SPACE BAR] and then [ENTER] to select the RIP direction from 
Both/ None/In Only/Out Only and None. 

(default) 

Version   Press [SPACE BAR] and then [ENTER] to select the RIP version from 

RIP-1/RIP-2B/RIP-2M. 

Multicast 

IGMP (Internet Group Multicast Protocol) is a session-layer protocol 
used to establish membership in a Multicast group. The Prestige 
supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). 
Press the [SPACE BAR] to enable IP Multicasting or select None to 
disable it. See the LAN Setup chapter for more information on this 
feature. 

(default) 

Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] 
at the message “Press ENTER to Confirm...” to save your configuration and return to menu 11, or press 
[ESC] at any time to cancel. 

Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the value 
to Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.  

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote 
node and the Prestige to prevent certain packets from triggering calls. You can specify up to four filter sets 
separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this 
field. Please refer to the Filters chapter for more information on defining the filters.