ZyXEL Prestige 792H SDSL Router 91-004-342004B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

28-20  

 

Filter Configuration 

Step 3.  This brings you to menu 11.5. Enter the example filter set number in this menu as shown in the 

following figure. 

 

 

 

 

 

 

 

This section shows you where to apply the filter(s) after you design it (them). Sets of factory default filter 
rules have been configured in menu 21 (but have not been applied) to filter traffic. 

Input Filter Sets: 

Apply filters for incoming traffic. You may apply protocol or device 
filter rules. See earlier in this chapter for information on filters.  

Output Filter Sets:  Apply filters for traffic leaving the Prestige. You may apply filter rules 

for protocol or device filters. See earlier in this section for 
information on types of filters. 

Call Filter Sets: 

Apply filters to decide if a packet should be allowed to trigger a call. 

You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, 
reduce traffic and prevent security breaches. Go to menu 3.1 (shown next) and type the number(s) of the 

Menu 11.5 – Remote Node Filter 

 

Input Filter Sets:

protocol filters= 

device filters=

Output Filter Sets:

protocol filters=

device filters=

Call Filter Sets:
protocol filters=

device filters=

 

 

 
3 

 

            Press ENTER to Confirm or ESC to Cancel: