Eaton Power-Sure 700 TDL-025K-6 Folheto
Códigos do produto
TDL-025K-6
Features
• Processor controlled voltage regulation
• Tight output voltage regulation
• Zero-current switching
• Wide input regulation range
• Triple shielded, computer grade transformer
• Highly efficient —97 percent typical
• High inrush capability
• Transient protection and high frequency filter
• Over/under voltage protection (optional)
• Includes input circuit breaker
• Manual bypass switch (optional)
• Tight output voltage regulation
• Zero-current switching
• Wide input regulation range
• Triple shielded, computer grade transformer
• Highly efficient —97 percent typical
• High inrush capability
• Transient protection and high frequency filter
• Over/under voltage protection (optional)
• Includes input circuit breaker
• Manual bypass switch (optional)
Pulsar series
Eaton Power-Sure 700
Intelligent protection for transmitters & industrial controls
The Eaton
®
Power-Sure
TM
700 three-phase power line conditioning
system provides exceptional system reliability that can be
attributed to Eaton’s processor-controlled zero-current cross tap
switching technology.
The Power-Sure 700 combines voltage regulation with a
The Power-Sure 700 combines voltage regulation with a
transformer and filter to remove transients and noise. The
combined effect is a regulating and shielded isolation transformer/
system that solves 99 percent of the electrical disturbance
problems, including electrical brownouts, sags, surges, transients
and other electrical disturbances.
This state-of-the-art power conditioner also provides the protection,
This state-of-the-art power conditioner also provides the protection,
efficiency and reliability that are critical to every application with
sensitive equipment.
10–300 kVA
Options
• RRM2020—Regulation Range Monitor has above, below and
normal LED indicator lights that indicate when the input is beyond
the regulation range or within the range.
the regulation range or within the range.
• RBS202x—Integral Manual Rotary Maintenance Bypass Switch
Specific models numbers include:
RBS2020 - 10 to 15 kVA units
RBS2021 - 25 to 30 kVA units
RBS2022 - 45 to 125 kVA units
RBS2023 - 150 kVA units
RBS2024 - 225 to 300 kVA units
• REP2020—Remote Emergency Power Off Option (REPO)—a
remotely mounted pushbutton is provided with 50 feet of cable.
The Shunt Trip option, STC2020, is required with this option.
The Shunt Trip option, STC2020, is required with this option.
• STC2020—Shunt Trip for Main Circuit Breaker Option.
• UOV2020—Under/Over Voltage Shutdown Option—if the output
exceeds preset values, the unit output will shut off electronically
& illuminate a diagnostic light.
& illuminate a diagnostic light.
• PSO2020—Under/Over Voltage Shutdown with Loss of Power Shut
Off—instead of disabling the output, this option will shunt trip the
main circuit breaker if the output voltage exceeds preset values.
The Shunt Trip option, STC2020, is required with this option.
main circuit breaker if the output voltage exceeds preset values.
The Shunt Trip option, STC2020, is required with this option.
• ERR1040—Extended Regulation Range Option—provides +10%
to - 40% input regulation range for intermittent duty only. Output
regulation is +5% to -6% from nominal with this option.
regulation is +5% to -6% from nominal with this option.