HP 701974-DH1 Manual Do Utilizador
Power connector
Description
Spare part number
Power connector cable (includes bracket and screws)
683859-001
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
Bottom door (see
b.
)
c.
d.
Keyboard (see
)
e.
Top cover (see
f.
Speakers (see
)
g.
Display (see
)
Remove the power cable:
1.
Position the computer upright with the front toward you.
2.
Remove the Phillips PM2.5×4.0 screw (1) that secures the power connector bracket to the
computer.
computer.
3.
Lift the bracket (2) out of the base enclosure.
Component replacement procedures
87