ZyXEL 202H 91-003-194003B Manual Do Utilizador

P-202H Plus v2 User’s Guide

179

Chapter 18 Menu 3 Ethernet Setup

The ZyXEL Device has built-in DHCP server capability that assigns IP addresses and DNS 
servers to systems that support DHCP client capability. For remote node TCP/IP 
configuration, refer to the chapter on Remote Node Configuration.

Use menu 3.2 to configure your ZyXEL Device for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 - LAN Setup. When menu 3 
appears, press 2 and press [ENTER] to display Menu 3.2 - TCP/IP and DHCP Ethernet 
Setup, as shown next

:

Figure 84   Menu 3.2 TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.

             Menu 3.2 - TCP/IP and DHCP Ethernet Setup

     DHCP Setup
       DHCP= Server
       Client IP Pool Starting Address= 192.168.1.33
       Size of Client IP Pool= 6
       Primary DNS Server= 0.0.0.0
       Secondary DNS Server= 0.0.0.0
       Remote DHCP Server= N/A

     TCP/IP Setup:
       IP Address= 192.168.1.1
       IP Subnet Mask= 255.255.255.0
       RIP Direction= Both
         Version= RIP-1

       Edit IP Alias= No

     Press ENTER to Confirm or ESC to Cancel:

Table 60   DHCP Ethernet Setup Fields

DHCP Setup

DHCP

This field enables/disables the DHCP server. If set to Server, your ZyXEL Device 

will act as a DHCP server. If set to None, the DHCP server will be disabled. If set to 

Relay, the ZyXEL Device acts as a surrogate DHCP server and relays requests and 

responses between the remote server and the clients.
When set to Server, the following four items need to be set:

Client IP Pool 

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.