ZyXEL 202H 91-003-194003B Manual Do Utilizador

P-202H Plus v2 User’s Guide

Chapter 22 Dial-in Setup

212

Figure 109   Configuring CLID With Callback

Go to menu 24.8 (ZyXEL Device on LAN 2) and type "sys trcl call" to test your connection 
with callback on CLID. The ZyXEL Device displays all communication traces as shown in the 
next figure. If CLID authentication fails, this means that the calling number does not match the 
Rem CLID number in menu 11.1.

Figure 110   Callback and CLID Connection Test

                    Menu 13 - Default Dial-in Setup

Telco Options:                       IP Address Supplied By:
  CLID Authen= Required                Dial-in User= Yes
                                       IP Pool= No
PPP Options:                             IP Start Addr= N/A
  Recv Authen= PAP                       IP Count(1,4)= N/A
  Compression= No
  Mutual Authen= No                  Session Options:
  O/G Username=                        Edit Filter Sets= No
  O/G Password= ********
  Multiple Link Options:
    Max Trans Rate(Kbps)= 128

Callback Budget Management:
  Allocated Budget(min)=
  Period(hr)=

               Press ENTER to Confirm or ESC to Cancel:

Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
LAN_2>sys trcl call
Tracelog type 9080 level 1
### Hit any key to terminate
*** INTL CLID check: ch=7743bc reason=-3026
*** INTL chanErr: chp=7743bc state=6 evt=0300
$$$ CALL CONNECT speed<64000> type<2> chan<0>
$$$ LCP opened
$$$ CHAP login to remote OK
$$$ IPCP negotiation started
$$$ IPCP opened