ZyXEL 202H 91-003-194003B Manual Do Utilizador

Códigos do produto

91-003-194003B

P-202H Plus v2 User’s Guide

279

Chapter 29 Firmware and Configuration File Maintenance

Enter 1 in menu 24.7 to display the following screen an upload firmware using FTP.

Figure 182 Menu 24.7.1 Upload System Firmware

29.4.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2

Figure 183 Menu 24.7.2 System Maintenance: Upload System Configuration File

To upload the firmware and the configuration file, follow these examples

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:

1. Launch the FTP client on your computer.
2. Type "open" and the IP address of your system.  Then type "root" and
   SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
   of your firmware upgrade file on your computer and "ras" is the
   remote file name on the system.
4. The system reboots automatically after a successful firmware upload.

For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your user manual.

Press ENTER to Exit:

Menu 24.7.2 - System Maintenance - Upload System Configuration File

To upload the system configuration file, follow the procedure below:

  1. Launch the FTP client on your computer.
  2. Type "open" and the IP address of your system. Then type "root" and
   SMT password as requested.
  3. Type "put configurationfilename rom-0" where "configurationfilename"
    is the name of your system configuration file on your computer, which
   will be transferred to the "rom-0" file on the system.
  4. The system reboots automatically after the upload system
configuration
   file process is complete.

Press ENTER to Exit: