Tandberg Data Streamer SCSI DLT-V4 Internal Grey 7301 7088 00 Manual Do Utilizador
Códigos do produto
7301 7088 00
DLT-V4 Product Manual
47
Chapter 4
4
Using Your Tape Drive
This chapter contains information regarding the functional operation of
the DLT-V4 tape drive.
LED Indicators
4
The tape drive has four light emitting diodes (LEDs). This section
describes the functions of the LEDs.
Power-On Self-Test
(POST) Indicator Activity
(POST) Indicator Activity
4
Each time you apply power to the tape drive, or reset the tape drive, it
performs a power-on self-test (POST). During POST, the LEDs illuminate
one at a time, from left to right. First, the
Ready
LED (Green) comes on,
followed by the
Fault
LED (Orange) approximately one second later, then
the
Clean
LED (Orange) approximately one second later, then four
seconds later the
Media
LED (Orange) illuminates. Each LED signifies a
different portion of the power-on process. All LEDs turn off momentarily.
If no data cartridge is loaded in the tape drive, the
Ready
LED then
illuminates steadily and POST is complete. This process takes
approximately eight seconds. If a data cartridge is in the tape drive
Note:
The front panel controls and indicators are in the same
locations on both the internal and tabletop tape drives. The
tabletop tape drive has a
Power
LED.